Multiple Tubular bag type dust collector with shaker cleaning designed for various air volume applications and solid particles filtration. Installed inside or outside of the facility without losing valuable floor space.
The 99% efficiency filter allows clean air to be recycled back into the premises for maximum energy savings.
Ferrous or non-ferrous manufacturing shops, plastics and composites fabrication as well as pharmaceutical plants and food industries. The manual or motorized cleaning systems filter particles from the filter and are then stored in a variety of bins, drawers or drums. Safety features such as explosion relief vents, back draft dampers or spark detection and extinguishing systems are available.
Product Description
- Powerful 1 H.P. motor for shaker mechanism
- Low or hight profile dust storage system
- Dust inlet with abrasion resistant feature
- Choice of interior or exterior installation
- Minimal field assembly required
General description
Dust and particles are carried from source capture drops into the main duct connected to the shaker Dust collector Larger particles fall by gravity into the hopper toward the dust storage drum or canister. Finer particles are vacuumed upward into the high efficiency Tubular filter. fan mounted on top/side of the unit discharge clean air into the premises When the unit is shut down, the electronic control panel activates the cleaning cycle by shaking the filter envelope creating upper oscillation instead of usual bottom filter shaking which may result in lesser efficient cleaning.
Filter inspection may be carried by simply opening the access door when unit is shut down. Dust collector with manual shaker cleaning system is performed by manually shaking the tubular filter bag. Primarily developed for interior installation in small shops and vocational schools, its use is perfect for medium to large size pollutants such as sawdust, grinding, buffing or sanding of different metals, powders and compo sites. Air volume capacity can vary from 500 CFM to 5000 CFM. The satin interior coated filter helps to minimize dust caking on filter surface. The angled hopper ensures constant sliding of dust into the dust storage drum. The support structure can be easily dismantled for relocation into another part of the facility using the unit or for a new installation in a room with limited size doorways.
Apply at following application:
- Metal Grinding
- Pharmaceutical
- Wood
- Shot blast
- Paper core grinding
- Silo Vent
- Grinding, sanding or buffing applications
Related Products
